Electric underfloor heating
No expensive maintenance and high initial investment.
It is easy to install on all surfaces.
WE OFFER
Innovative heating
Currently the most innovative and economic underfloor heating for your home, business premises, or outside surfaces.
Consulting and planning
We provide everything: consulting, plan preparation, and presentation of advantages of i-eco underfloor heating.
Assembly and installation
Repair service and support
WE HEAT
RESIDENTIAL BUILDINGS
INDUSTRIAL AND RELIGIOUS BUILDINGS
EXTERNAL SURFACES, GREENHOUSES
WE PROVIDE THE SAME QUALITY OF HEATING FOR CLOSED SPACES,
REGARDLESS OF THEIR SIZE!
Basic characteristics
of i-eco heating
Cost efficient:
- low initial investment
- extremely low power consumption
- negligible maintenance costs
- long service life
- 10% residential surface saving
We provide:
- highest comfort
- safety
- increased hygiene
We heat:
- residential buildings
- commercial buildings and mobile units
- external surfaces
Installation options:
- floor
- wall (ceiling)
- combined
Installation layer:
- under the screed
- on top of the screed
- over existing flooring or wall covering
Connection:
- to the power grid
- directly to alternative energy sources
- to an accumulator
NOT required:
- a chimney
- a boiler room
- a fuel tank
Without:
- adverse effects on the vascular system
- negative effects on flooring
- circulation of dust and other allergens
- irritating noise or smells
Why choose i-eco underfloor heating?
COST EFFICIENT:
1 – INITIAL INVESTMENT
I-eco heating is a type of local heating, which do not require a boiler room, a chimney, or a fuel tank. They are therefore must cheaper than central heating systems. The cost of constructing a boiler room, chimney, and a fuel tank generally exceeds the full initial investment for our heating system.
If you invest your savings into photovoltaics, you will have free heating.
2 – HEATING EFFICIENCY (energy consumption)
Our heating has no energy loss characteristic for central systems (boiler heat loss, loss in transfer to the heat exchangers, loss on regulation). As an underfloor heating systems, it has an almost ideal temperature profile. The large heat exchanger allows an extremely low temperature regime. Regulation is direct and adjustable, for every space separately. In this manner, we fulfilled all conditions for maximum energy efficiency.
It is simply impossible to ensure quality heating with less energy! Heating costs are therefore also very low.
3 – MAINTENANCE COSTS
Regular maintenance: Regular maintenance is simply not required. This eliminates annual costs of maintenance for a boiler, fuel tank, chimney, and heat exchangers. Extraordinary maintenance (malfunctions) is rare and inexpensive.
4 – SERVICE LIFE (DURABILITY)
The projected service life of the heating strips exceeds 100 years.
The projected service life of the transformers exceeds 50 years.
Our heating system most likely has no competition in the maintenance costs and service life categories.
Conclusion: The system completely negates the relatively high energy (electricity) cost with a low initial investment, maximum energy efficiency, durability, and negligible maintenance costs.
HIGHEST COMFORT
With an extremely low temperature regime and enormous heat exchanger, this heating provides nothing but pure comfort. Living comfort was, in fact, our primary focus. The results are as follows:
– steady and balanced heat exchange
– even temperature distribution across the floor and throughout the room
– almost ideal temperature profile (warm feet and cool head)
– temperature regime setting for each room separately
– acceptability from the perspective of room design (no radiators)
– does not cause any noise, smells, dust circulation, or surface temperatures not suitable for contact
– good regulation features
– option of floor, wall, or combined installation
HYGIENE
The basic difference between “radiator” and underfloor heating is in the method of heat exchange. Floor heat exchangers radiate or transfer heat evenly, while radiators convert heat, i.e. exchange heat by air circulation. Thus, dust and biological growths, which generally develop on moist floors, are transferred into the room in addition to the heat. By heating and drying the floor, underfloor heating systems to a large degree prevent the development of such organisms.
Therefore: less dust, less mites, less bacteria, less allergies…
SAFETY
The system operates at a safe voltage of 3–48 V. Heating strips can be drilled through or wet without any consequences. Restoration of potential interruptions of strips is quite easy. An interruption can be located under the screed and flooring. There is no danger of spilling.
Electromagnetic radiation values are significantly below the permitted limits. For ease of mind, if so requested, we do not install heating strips below beds. Therefore, there is no harmful effect of EM radiation!
Adverse effects on the vascular system?
The system has an enormous heat exchanger and an appropriate, extremely low, temperature regime / operating temperature. The floor temperature is rooms where we spend most time is approximately 26ºC, which is a full 10ºC below body temperature.
The low temperature regime completely eliminates the possibility of a negative impact on the vascular system!
To illustrate: if you want to notice the warmth of the floor heated to 26ºC, you have to place one hand on the floor and the other on the wall.
The theory that underfloor heating can have a negative effect on the vascular system arose years ago, when the same boilers with a high-temperature heating regime were used for both underfloor and “radiator” heating.
USABILITY
The system can meet almost all user demands
I-eco underfloor heating is suitable for all types of flooring
The system uses the largest heat exchanger on the market. It covers up to 80% of floor surface (water pipes – up to 20%, wires at 230 V – up to 8%), with an appropriate temperature regime and operating temperature. It can therefore heat a room without temperature overload of any flooring, ensuring a top-of-the-line distribution of heat throughout the floor and space.
I-eco underfloor heating is suitable for all types of floor
I-eco underfloor heating can be adapted to all temperature profiles
Heat distribution
Heating strips are not installed in a raster pattern, but as required for particulars parts of the room. Less power along internal walls, more power under windows and along external walls, ideal power on walking surfaces.
Increased power ensures better insulation of external walls and elimination of condensation on glass surfaces (recuperation).
Rated power
Spatial issues
I-eco heating and heating with aluminium strips does not require a boiler room, a chimney, or a fuel tank. Furthermore, it allows a more free room design, without the limitations of radiators or other visible heat exchangers. The price of the saved living area usually exceeds the investment on heating.
Adaptable installation
I-eco heating and heating with aluminium strips does not require a boiler room, a chimney, or a fuel tank. Furthermore, it allows a more free room design, without the limitations of radiators or other visible heat exchangers. The price of the saved living area usually exceeds the investment on heating.
Multiple energy sources
I-eco underfloor heating can be connected to the power grid, directly or indirectly to renewable energy sources (photovoltaics, wind power stations) or accumulators. Usable at holiday cottages, mobile units, or during longer power supply interruptions.
OUR PARTNERS
OUR POWER IS IN COOPERATION
Slovakia
Bosnia and Hercegovina
Germany
Netherlands, Switzerland, Denmark, Sweden, Norway, Finland and the United States
Great Britain
%
energy efficiency
years of warranty
satisfied customers
m2 heated
Send an enquiry
and arrange a free consultation and a visit.
