041 668 946 info@i-eco.si

Why should you choose the 
i-Eco 12V floor heating?

The i-Eco 12V underfloor heating offers exceptional comfort and up to 45% energy savings.

No high initial investments, expensive boilers, boilers, or chimneys. It can be easily installed on any surface, so it’s up to you to decide where to place it. Also on walls, roofs, driveways, gardens… the choice is yours.

That is why the i-Eco 12V heating system is the most efficient heating system on the market. And certainly the most economical.

System advantages

Installation scheme

Initial investment

I-eco heating is a type of local heating, which do not require a boiler room, a chimney, or a fuel tank. They are therefore must cheaper than central heating systems. The cost of constructing a boiler room, chimney, and a fuel tank generally exceeds the full initial investment for our heating system.

If you invest your savings into photovoltaics, you will have free heating.


Our heating has no energy loss characteristic for central systems (boiler heat loss, loss in transfer to the heat exchangers, loss on regulation). As an underfloor heating systems, it has an almost ideal temperature profile. The large heat exchanger allows an extremely low temperature regime. Regulation is direct and adjustable, for every space separately. In this manner, we fulfilled all conditions for maximum energy efficiency.

It is simply impossible to ensure quality heating with less energy! Heating costs are therefore also very low.

Low maintenance

Regular maintenance: Regular maintenance is simply not required. This eliminates annual costs of maintenance for a boiler, fuel tank, chimney, and heat exchangers. Extraordinary maintenance (malfunctions) is rare and inexpensive.

Long Service life

The projected service life of the heating strips exceeds 100 years.

The projected service life of the transformers exceeds 50 years.

Our heating system most likely has no competition in the maintenance costs and service life categories.

Conclusion: The system completely negates the relatively high energy (electricity) cost with a low initial investment, maximum energy efficiency, durability, and negligible maintenance costs.

Saving Space

The i-Eco underfloor heating with aluminum strips does not require a boiler room, chimney or energy storage. In addition, it allows free design of the room without being restricted by radiators or other visible radiators. The cost of saving living space usually exceeds the investment in the heating system.


The thickness of the heating tapes is only 0.250 mm. They can be laid under the screed, on top of the screed or on top of the existing floor coverings.

We install the systems for each room separately. Works on the building can be completed simultaneously or sequentially, or in stages. A gradual installation in a room is also possible.

More Comfort

With an extremely low temperature regime and enormous heat exchanger, this heating provides nothing but pure comfort. Living comfort was, in fact, our primary focus. The results are as follows:
– steady and balanced heat exchange
– even temperature distribution across the floor and throughout the room
– almost ideal temperature profile (warm feet and cool head)
– temperature regime setting for each room separately
– acceptability from the perspective of room design (no radiators)
– does not cause any noise, smells, dust circulation, or surface temperatures not suitable for contact
– good regulation features
– option of floor, wall, or combined installation.


The basic difference between “radiator” and underfloor heating is in the method of heat exchange. Floor heat exchangers radiate or transfer heat evenly, while radiators convert heat, i.e. exchange heat by air circulation. Thus, dust and biological growths, which generally develop on moist floors, are transferred into the room in addition to the heat. By heating and drying the floor, underfloor heating systems to a large degree prevent the development of such organisms.

Therefore: less dust, less mites, less bacteria, less allergies…


The system has an enormous heat exchanger and an appropriate, extremely low, temperature regime / operating temperature. The floor temperature is rooms where we spend most time is approximately 26ºC, which is a full 10ºC below body temperature.

 The low temperature regime completely eliminates the possibility of a negative impact on the vascular system!

To illustrate: if you want to notice the warmth of the floor heated to 26ºC, you have to place one hand on the floor and the other on the wall.

The theory that underfloor heating can have a negative effect on the vascular system arose years ago, when the same boilers with a high-temperature heating regime were used for both underfloor and “radiator” heating.


The system operates at a safe voltage of 3–48 V. Heating strips can be drilled through or wet without any consequences. Restoration of potential interruptions of strips is quite easy. An interruption can be located under the screed and flooring. There is no danger of spilling.

Electromagnetic radiation values are significantly below the permitted limits. For ease of mind, if so requested, we do not install heating strips below beds. Therefore, there is no harmful effect of EM radiation!

Basic characteristics

of i-Eco heating

Cost efficient:

  • low initial investment
  • extremely low power consumption
  • negligible maintenance costs
  • long service life
  • 10% residential surface saving

We provide:

  • highest comfort
  • safety
  • increased hygiene

We heat:

  • residential buildings
  • commercial buildings and mobile units
  • external surfaces

Installation options:

  • floor – use “hydrostop” materials to protect the heating tape
  • wall (ceiling)
  • combined

Installation layer:

  • under the screed
  • on top of the screed
  • over existing flooring or wall covering


  • to the power grid
  • directly to alternative energy sources
  • to an accumulator

NOT required:

  • a chimney
  • a boiler room
  • a fuel tank


  • adverse effects on the vascular system
  • negative effects on flooring
  • circulation of dust and other allergens
  • irritating noise or smells


The system can meet almost all user demands

I-eco underfloor heating is suitable for all types of flooring

The system uses the largest heat exchanger on the market. It covers up to 80% of floor surface (water pipes – up to 20%, wires at 230 V – up to 8%), with an appropriate temperature regime and operating temperature. It can therefore heat a room without temperature overload of any flooring, ensuring a top-of-the-line distribution of heat throughout the floor and space.

I-eco underfloor heating is suitable for all types of floor

The thickness of heating strips is only 0.250 mm. They can be installed under or on top of the screed, or on top of existing flooring.

I-eco underfloor heating can be adapted to all temperature profiles

Strips can be installed on the floor, walls, or ceilings. We can also combines installation types. Regardless of its location, the heat exchanger ensures the highest comfort.

Heat distribution

Heating strips are not installed in a raster pattern, but as required for particulars parts of the room. Less power along internal walls, more power under windows and along external walls, ideal power on walking surfaces.

Increased power ensures better insulation of external walls and elimination of condensation on glass surfaces (recuperation).

Rated power

The lower the temperature regime, the lower the necessary rated power.  The system thus solves the issues of overloaded electrical installations.

Spatial issues

I-eco heating and heating with aluminium strips does not require a boiler room, a chimney, or a fuel tank. Furthermore, it allows a more free room design, without the limitations of radiators or other visible heat exchangers. The price of the saved living area usually exceeds the investment on heating.

Adaptable installation

I-eco heating and heating with aluminium strips does not require a boiler room, a chimney, or a fuel tank. Furthermore, it allows a more free room design, without the limitations of radiators or other visible heat exchangers. The price of the saved living area usually exceeds the investment on heating.

Multiple energy sources

I-eco underfloor heating can be connected to the power grid, directly or indirectly to renewable energy sources (photovoltaics, wind power stations) or accumulators. Usable at holiday cottages, mobile units, or during longer power supply interruptions.

Tradition of quality

Join our satisfied customers

Installed srips

Floor heating

Satisfied customers

Send an enquiry

and arrange a free consultation.


+386 41668 946


Kolodvorska cesta 2, 4000 Kranj